Photo 1 shows the NinoTNC board with USB interface removed & exposing TTL interface connections.
Photo 2 shows how the 4 port USB (Targus) is attached to USB interface in RFID box & NinoTNC laid out in top cover of box.
Photo 3 shows USB hub in position with NinoTNC in top cover.
Photo 4 shows what the box looks like with cover close.
NinoTNC will be mounted with DE9 through top cover of box so status LEDs will be visible with cover closed.
DE9 connector will be pointed in same direction as other connectors when cover closed. NinoTNC will be held to inside
top cover with double side tape or adhesive standoffs.
2 thoughts on “NinoTNC & USB integration”
Comments are closed.
Seems that Photos2 & 3 didn’t upload. New to this so will post again later.
@bnewicen Keeping it waterproof will be the challenge too. Hopefully the hole we need for the DE9 isn't too big.